How borehole fiber optics measure small earthquakes—and can bias the results

A Utah deployment recorded thousands of nearby microearthquakes. Cable direction and measurement length matter when interpreting those signals.

A Utah deployment recorded thousands of nearby microearthquakes. Cable direction and measurement length matter when interpreting those signals.
A fiber-optic cable in a 3,000-meter borehole at Utah’s Cape Modern geothermal site provided measurements of thousands of nearby microearthquakes. Chang and colleagues used this single deployment to assess how well the technique measures small earthquakes—and where it can mislead, according to an October 6 report by Eos.
Small earthquakes occur more often than large ones, giving researchers many events to study. But their seismic waves quickly lose energy as they travel through Earth, making those events difficult to measure. Deep-borehole fiber optics may offer a more sensitive and precise way to gather their signals.
The technique, called distributed acoustic sensing (DAS), detects vibrations through small changes in light reflected back along a fiber-optic cable. The Utah array had 1,600 measurement points, called channels, spaced about two meters apart. Seismic waves reached the cable from thousands of microearthquakes within a few kilometers of the borehole.
By analyzing strain—the stretching and compression along the cable—the researchers found strong attenuation, or loss of seismic-wave energy, near the surface. Eos reports that attenuation generally decreased with depth and varied somewhat with rock type.
Chang and colleagues also found that spectral stress drop, a measure of the shear stress released during an earthquake, did not depend on earthquake magnitude in the studied data. Variation in stress drop might reflect differences in faults or rupture type, but observational error could also explain it. These findings come from one site.
Eos says the results could help researchers understand whether small earthquakes release less stress than large ones. That question matters for understanding how earthquakes rupture and for assessing seismic hazards.
The authors caution that a cable does not respond equally to every seismic-wave motion. It is more sensitive when particles move in alignment with the cable. This directional sensitivity, called cable directivity, needs to be accounted for when interpreting the measurements.
Another choice is gauge length: the length of cable over which a measurement is averaged. A longer gauge length makes the signal clearer relative to background noise, but it also reduces the measured strength of high-frequency vibrations. Clearer signals therefore do not necessarily preserve all the frequency information researchers need.
According to Eos, cable directivity and gauge-length choices may bias estimates of earthquake magnitude and a frequency measurement called corner frequency. For future studies, the authors urge researchers to account for both effects. Eos identifies comparison with estimates from other methods, including the empirical Green’s function approach, as one way to account for these biases in estimates of earthquake properties.

Food & Water Watch compared rates at 500 major systems and found widespread affordability problems for low-income households.
3 min

Researchers found that existing cartilage cells changed their activity after treatment. Human surgical tissue also responded, but the approach has not been shown to work in patients.

A comparison of 123 species offers clues to how birds produce loud calls, but not why those calls evolved.
4 min